What Do You Really Need A Customized Motorcycle?
Motorcycles have been popular for decades and more people realize their dream of owning one every year. But, shopping for a motorcycle that fits you comfortably can be very time consuming. You have to be comfortable while riding and you need to be able to control the bike for safety. Most motorcycle accidents happen to new riders who have not chosen their motorcycle wisely. A customized motorcycle that is designed exactly the way you want it might not be the best option either.
Although a motorcycle that is built especially for you might be pleasing to the eye there are considerations
1. A customized motorcycle can cost upwards of $100,000.00, more than buying a house.
2. Finding a reputable builder
3. It usually takes months to build
4. Insurance and cost of repairs
5. Replacement would be difficult if not impossible
Although you can't customize all of the features of a prebuilt motorcycle from your local dealer, there are many that you can. Having someone build a customized motorcycle for you is an option but, you may find you can make the changes you are looking for to a bike at your local dealer.
1. Order a motorcycle from a dealer and change some of the options
2. These motorcycles have a manufacturer's warranty that can be easily extended
3. The price is more affordable and can often be negotiated
4. Easily customizable with readily available parts
There are some bikers that are capable of building their own custom motorcycle and many of them have. The main reason a person may need a customized motorcycle would be a disability that prevents them from riding a standard one. Even with this in mind it is possible to find a bike from a local dealer that can be modified at the factory to fit the need. This type of option would still require a little time to build but would be much more affordable.
Another reason for a special build would be weight. The average motorcycle recommends a 350 pound weight limit. This could make it difficult and dangerous for a large person to carry a rider. There are options for these situations as well, consider a side car or a trike rather than a customized motorcycle.
If you are especially short or tall you might think you can't find a bike that fits you comfortably but, that's not the case. You may need to shop around a little more but most manufactures provide a variety of styles to fit just about every rider and you will find one you are comfortable with.
The point is, you don't need to have an expensive customized motorcycle built for you unless you want it. But if you choose to have one custom built to your specifications you will want to make sure you choose a reputable builder unless you plan to build it yourself. Find out about their warranty if any and refund policies if you are not satisfied. In most cases the builder will require a significant deposit that may not be refundable. You will want to be involved as the build progresses to insure your desires are being met.
Owning and riding your own motorcycle can be a very relaxing way to spend your free time, and an inexpensive form of transportation especially with the price of gas today. The average motorcycle holds about 4 gallons of gas and can get up to 300 miles per tank full.
Gadis Bisyar
Home » Posts filed under Triumph
Tampilkan postingan dengan label Triumph. Tampilkan semua postingan
Tampilkan postingan dengan label Triumph. Tampilkan semua postingan
The Motorcycle Troubleshooting overviews
The Motorcycle Troubleshooting
All engines need three basic things to run fuel, spark and air. These simple things can cause your motorbike to not start up or run poorly. First start off with the fuel remove the hose off the tank and make sure the fuel is flowing properly. Some bikes will have to turn the fuel selector to prime, not on, or fuel will not flow. Take a flashlight and look down into the tank, is the fuel varnished or is there dirt in the tank? Older motorbikes had a problem with tanks rusting inside and would plug the screen up inside the tank. Fuel delivery may still be a problem but we will come back to that later.
Next remove the spark plugs, you may need to remove the tank to reach them. Inspect every spark plug as you take them out. All the spark plugs should look the same. If a plug looks white colored, that cylinder may be (lean) and not getting enough fuel. If you have a plug that looks wet and black, that cylinder may getting too much fuel (rich) or not sparking good. Remove all the spark plugs and snap the plugs back into their wires. Set the spark plugs on the engine so that they can ground themselves. Crank the bike over and watch the plugs for sparks, preferably somewhere dark. Make sure you look at all the plugs to make sure they are all sparking. If one spark looks weak check the wire and plug, if old or worn replace them. If their is no spark the coil may be bad.
If you have any test equipment such as an ohm meter, you can find out what the resistance reading should be for your bikes coils. This way you will know for sure if the coils are o.k. If the ignition system looks fine move on to the carburetors. First, if the bike has not been maintained recently (a problem in itself) make sure the carbs are synchronized. To do this you need a vacuum gauge made for this. Remove the small rubber plug located between the carbs and the cylinder. Attach the gauge and take the readings from each cylinder. Replace the caps when not measuring or it won't run right. Adjust the throttle screw or linkage for that carb until they all read close to one another.
Refer back to inspecting the spark plugs. If one cylinder looked lean or rich check all hoses for cracks and air leaks. If the motorcycle has not been run in awhile the carbs may be (gummed up). Remove the float bowl off the bottom of the carb. Look in the bowl for dark varnish looking gas. If the fuel looks dark you will probably have to remove the pilot and main jets and carefully run a wire through the center hole to clean them out. Be careful to not bend the float as the height needs to be correct to run well also. Check that the small needle attached to the float between the pivot point, is moving up and down. If it doesn't move smoothly the carb will not fill up with gas or will run low as your driving down the road.
Make sure you check the battery also, if they become weak the ignition system won't have enough power to keep the bike running smoothly. If you still haven't found anything make sure you valve lash has been checked at the correct mileage intervals. If not this can cause many problems with the way it runs. Also you can screw a compression gauge into the spark plug holes and check that they are within 5-10% of each other. If one is way down you have a serious problem either with the pistons, bore or valves. This should be a good start to finding a general problem with your motorbike.
Gadis Bisyar
All engines need three basic things to run fuel, spark and air. These simple things can cause your motorbike to not start up or run poorly. First start off with the fuel remove the hose off the tank and make sure the fuel is flowing properly. Some bikes will have to turn the fuel selector to prime, not on, or fuel will not flow. Take a flashlight and look down into the tank, is the fuel varnished or is there dirt in the tank? Older motorbikes had a problem with tanks rusting inside and would plug the screen up inside the tank. Fuel delivery may still be a problem but we will come back to that later.
Next remove the spark plugs, you may need to remove the tank to reach them. Inspect every spark plug as you take them out. All the spark plugs should look the same. If a plug looks white colored, that cylinder may be (lean) and not getting enough fuel. If you have a plug that looks wet and black, that cylinder may getting too much fuel (rich) or not sparking good. Remove all the spark plugs and snap the plugs back into their wires. Set the spark plugs on the engine so that they can ground themselves. Crank the bike over and watch the plugs for sparks, preferably somewhere dark. Make sure you look at all the plugs to make sure they are all sparking. If one spark looks weak check the wire and plug, if old or worn replace them. If their is no spark the coil may be bad.
If you have any test equipment such as an ohm meter, you can find out what the resistance reading should be for your bikes coils. This way you will know for sure if the coils are o.k. If the ignition system looks fine move on to the carburetors. First, if the bike has not been maintained recently (a problem in itself) make sure the carbs are synchronized. To do this you need a vacuum gauge made for this. Remove the small rubber plug located between the carbs and the cylinder. Attach the gauge and take the readings from each cylinder. Replace the caps when not measuring or it won't run right. Adjust the throttle screw or linkage for that carb until they all read close to one another.
Refer back to inspecting the spark plugs. If one cylinder looked lean or rich check all hoses for cracks and air leaks. If the motorcycle has not been run in awhile the carbs may be (gummed up). Remove the float bowl off the bottom of the carb. Look in the bowl for dark varnish looking gas. If the fuel looks dark you will probably have to remove the pilot and main jets and carefully run a wire through the center hole to clean them out. Be careful to not bend the float as the height needs to be correct to run well also. Check that the small needle attached to the float between the pivot point, is moving up and down. If it doesn't move smoothly the carb will not fill up with gas or will run low as your driving down the road.
Make sure you check the battery also, if they become weak the ignition system won't have enough power to keep the bike running smoothly. If you still haven't found anything make sure you valve lash has been checked at the correct mileage intervals. If not this can cause many problems with the way it runs. Also you can screw a compression gauge into the spark plug holes and check that they are within 5-10% of each other. If one is way down you have a serious problem either with the pistons, bore or valves. This should be a good start to finding a general problem with your motorbike.
Gadis Bisyar
The Triumph Motorcycles Histories
Motorcycle enthusiast must be knows about Triumph motorcycle, but not every motorcycle lovers know about the history of Triumph motorcycle. Triumph motorcycles are rich in history. The bikes were made famous during the war times. Remember all the war movies that had a soldier riding a motorcycle? Chances are, it was probably a Triumph. History sometimes throws up some strange truths, no more so than that which tells us, that the most British of motorcycles owes its existence to a German.
The Triumph Motorcycles History
Triumph motorcycles has always provided that special experience by engineering motorcycles that combine a immense riding experience blended by a well-balanced, straightforward perfect handling chassis mounted with a strong muscular, supple get behind me engines.
In 1883, men with name Siefried Bettmann created the motorcycle company which would later be known as the maker of Triumph motorcycles. Siefried Bettman known as an ambitious young man, he bought and sold bicycles and imported sewing machines from Germany. Then in 1886, he changed the name of the company to the Triumph Cycle Company, a name synonymous with British bikes was born. The company are significant development, especially when the fellow countryman Moritz Schulte arrival to the company. The Triumph has been in the business for quite some time, but its journey isn’t without seemingly insurmountable challenges.
In 1889, the Triumph began distributing bicycles and went on to develop motorcycles. They began to produce motorcycles by 1902, which were fitted with a Belgian-made engine. Then in 1903, as production rose to more than 500 units, Triumph then went on to produce motorcycles in Germany factory. The company had a break during the First World War.
After the war, Bettmann and Schulte could not agree about the issue of car manufacture, and Schulte decided to leave the company. In 1920, the company bought the former Hillman car factory in Coventry, and by 1923 had produced the first car bearing the name of The Triumph Motor Company. The journey of the triumph of Triumph motorcycle is long tail story, then nowadays we can see that Triumph are one of the best motorcycles in the world. Today they have not lost the touch and if you desire they are still producing a rocket between your legs.
About the Author
This article provided by Marikxon Manurung on http://motorcycle-guideline.com/triumph-motorcycles-history/ You can also can get more motorcycle information, free! If you’re looking for honest evaluations of the newest, you’ll find the reviews from these site helpful! Hope you find what you need, and just enjoy it.
Gadis Bisyar
The Triumph Motorcycles History
Triumph motorcycles has always provided that special experience by engineering motorcycles that combine a immense riding experience blended by a well-balanced, straightforward perfect handling chassis mounted with a strong muscular, supple get behind me engines.
In 1883, men with name Siefried Bettmann created the motorcycle company which would later be known as the maker of Triumph motorcycles. Siefried Bettman known as an ambitious young man, he bought and sold bicycles and imported sewing machines from Germany. Then in 1886, he changed the name of the company to the Triumph Cycle Company, a name synonymous with British bikes was born. The company are significant development, especially when the fellow countryman Moritz Schulte arrival to the company. The Triumph has been in the business for quite some time, but its journey isn’t without seemingly insurmountable challenges.
In 1889, the Triumph began distributing bicycles and went on to develop motorcycles. They began to produce motorcycles by 1902, which were fitted with a Belgian-made engine. Then in 1903, as production rose to more than 500 units, Triumph then went on to produce motorcycles in Germany factory. The company had a break during the First World War.
After the war, Bettmann and Schulte could not agree about the issue of car manufacture, and Schulte decided to leave the company. In 1920, the company bought the former Hillman car factory in Coventry, and by 1923 had produced the first car bearing the name of The Triumph Motor Company. The journey of the triumph of Triumph motorcycle is long tail story, then nowadays we can see that Triumph are one of the best motorcycles in the world. Today they have not lost the touch and if you desire they are still producing a rocket between your legs.
About the Author
This article provided by Marikxon Manurung on http://motorcycle-guideline.com/triumph-motorcycles-history/ You can also can get more motorcycle information, free! If you’re looking for honest evaluations of the newest, you’ll find the reviews from these site helpful! Hope you find what you need, and just enjoy it.
Gadis Bisyar
Langganan:
Postingan (Atom)